Theory
When a solve starts (flow, acoustics, or a re-run of the acoustics with refinement bands) the program stores every setting that shapes the solved results. The Results step compares them with the project's settings as they are now: the material and its operating pressure, the boundary conditions (outlet pressure, perforated walls, acoustic ports and their terminations), the frequencies, the meshes and the solver settings. Settings the Results step itself evaluates without a solve are not listed: the order analysis, the radiated sound pressure level, the source, radiation and outside temperature of the insertion loss, the global parameter table and the template the project was made from. A change of the CAD model is reported by the mesh check of the Run step instead.
Default and rule
- Default
- shown only when a setting differs
- Rule
Shown when at least one setting differs; runs made before this check existed show no note.
- Source
The program's own comparison.
Valid range every setting that shapes the solved results
Not blocking
The note never stops a post-processing action; it only says which numbers were made with earlier settings.